WARNING : Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer; Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
WARNING: This product can expose you to chemicals including nickel, cobalt and lead, which are known to the State of California to cause cancer and lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
![[0, ]](/img/warning.png)
California Proposition 65
Dovetail router bits
7/8/918
The beautifully crafted dovetail joint is a classic that appeals to both professionals and novices alike.
Shop Tips: Two passes are recommended when routing dovetails with a template. Check that the dovetails have been cut through completely and smoothly before removing the workpiece. For even easier routing and less stress on your dovetail bit, run the first pass with a straight bit. Use a dovetail on your router table equipped with a fence to achieve difficult chamfer angles.
Safety Tips: If the dovetail bit jams while working, adjust the position of the bit in the collet and ensure the cutting depth is appropriate. Do not lift the router out of the template.
Variations
Filter
| Item Code | Description | D | I | L | A | S | Z | MAT | RH-LH |
|---|---|---|---|---|---|---|---|---|---|
|
818.064.11
|
For Incra Jig | 1/4' | 5/16' | 2-1/2'' | 7,5° | 1/4' | 2 | HWM | RH |
|
818.065.11
|
For Leigh Jig | 1/4' | 1/4' | 2'' | 8° | 1/4' | 2 | HWM | RH |
|
818.564.11
|
For Incra Jig | 1/4' | 5/16' | 2-1/2'' | 7,5° | 1/2' | 2 | HW | RH |
|
818.580.11
|
For Incra Jig | 5/16' | 3/8' | 2-1/2'' | 9° | 1/2' | 2 | HW | RH |
|
818.080.11
|
For Incra Jig | 5/16' | 3/8' | 2-1/16'' | 9° | 1/4' | 2 | HWM | RH |
|
818.081.11
|
For Leigh Jig | 5/16' | 3/8' | 2-9/64'' | 8° | 1/4' | 2 | HWM | RH |
|
818.096.11
|
For Incra Jig | 3/8' | 3/8' | 2-1/16'' | 9° | 1/4' | 2 | HW | RH |
|
818.097.11
|
For Leigh Jig | 3/8' | 1/2' | 2-3/8'' | 8° | 1/4' | 2 | HWM | RH |
|
818.098.11
|
3/8' | 3/8' | 2-3/8'' | 14° | 1/4' | 2 | HWM | RH | |
|
818.596.11
|
For Incra Jig | 3/8' | 3/8' | 2-1/2'' | 9° | 1/2' | 2 | HW | RH |
|
818.111.11
|
For Leigh Jig | 7/16' | 5/8' | 2-3/8'' | 8° | 1/4' | 2 | HW | RH |
|
818.128.11
|
For Incra Jig | 1/2' | 1/2' | 2-1/16'' | 14° | 1/4' | 2 | HW | RH |
|
818.129.11
|
For Leigh Jig | 1/2' | 13/16' | 2-3/4'' | 8° | 1/4' | 2 | HW | RH |
|
818.130.11
|
For Leigh Jig | 1/2' | 1/2' | 2-7/16'' | 14° | 1/4' | 2 | HW | RH |
|
818.132.11
|
For Leigh Jig | 1/2' | 13/32' | 2-3/8'' | 18° | 1/4' | 2 | HW | RH |
|
818.133.11
|
For Leigh Jig | 1/2' | 5/8' | 2-3/8'' | 10° | 1/4' | 2 | HW | RH |
|
818.628.11
|
For Incra Jig | 1/2' | 1/2' | 2-1/2'' | 14° | 1/2' | 2 | HW | RH |
|
818.635.11
|
For PORTER-CABLE® | 17/32' | 3/4' | 2-27/64'' | 7° | 1/2' | 2 | HW | RH |
|
818.142.11
|
9/16' | 3/8' | 2'' | 14° | 1/4' | 2 | HW | RH | |
|
818.158.11
|
For Incra Jig | 5/8' | 7/8' | 2-3/8'' | 7° | 1/4' | 2 | HW | RH |
|
818.658.11
|
For Incra Jig | 5/8' | 7/8' | 2-5/8'' | 7° | 1/2' | 2 | HW | RH |
|
818.674.11
|
For Leigh Jig | 11/16' | 1' | 3-1/16'' | 8° | 1/2' | 2 | HW | RH |
|
818.690.11
|
For Incra Jig | 3/4' | 7/8' | 2-5/8'' | 7° | 1/2' | 2 | HW | RH |
|
818.691.11
|
3/4' | 3/4' | 3-1/16'' | 14° | 1/2' | 2 | HW | RH | |
|
818.190.11
|
For Incra Jig | 3/4' | 7/8' | 2-3/8'' | 7° | 1/4' | 2 | HW | RH |
|
818.191.11
|
3/4' | 7/8' | 2-3/8'' | 14° | 1/4' | 2 | HW | RH | |
|
818.706.11
|
For Leigh Jig | 13/16' | 1-1/4' | 3-5/16'' | 8° | 1/2' | 2 | HW | RH |
|
818.722.11
|
7/8' | 7/8' | 2-3/4'' | 7° | 1/2' | 2 | HW | RH |