WARNING : Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer; Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
WARNING: This product can expose you to chemicals including nickel, cobalt and lead, which are known to the State of California to cause cancer and lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
![[0, ]](/img/warning.png)
California Proposition 65
Fresas de corte recto para canales, serie corta
7/8/911
Esta fresa de 2 cortes está fabricada en acero especialmente creado para soportar cargas de trabajo muy elevadas.
A ello se suma el mejor carburo de tungsteno para cortes. Todo el material (de primera calidad) se recubre con un revestimiento de resina fluorocarbónica P.T.F.E. de color anaranjado.
Nuestras fresas permiten máxima precisión de corte y favorecen el deslizamiento y la expulsión de las virutas por el diseño.
A ello se suma el mejor carburo de tungsteno para cortes. Todo el material (de primera calidad) se recubre con un revestimiento de resina fluorocarbónica P.T.F.E. de color anaranjado.
Nuestras fresas permiten máxima precisión de corte y favorecen el deslizamiento y la expulsión de las virutas por el diseño.
Cada fresa pasa por rígidas pruebas de seguridad, equilibrado, tolerancia de corte y concentricidad antes de ser enviada al cliente.
Las fresas CMT permiten una producción en escala industrial con diferentes materiales como la madera, contrachapados y compuestos.
Las fresas CMT permiten una producción en escala industrial con diferentes materiales como la madera, contrachapados y compuestos.
Variantes
Filtra
| Producto | Descripción | D | I | L | S | Z | MAT | RH-LH |
|---|---|---|---|---|---|---|---|---|
|
811.020.11
|
2mm | 5/32' | 1-3/4'' | 1/4' | 1 | HWM | RH | |
|
811.030.11
|
3mm | 5/16' | 1-3/4'' | 1/4' | 2 | HWM | RH | |
|
811.032.11
|
1/8' | 3/8' | 1-3/4'' | 1/4' | 2 | HWM | RH | |
|
811.040.11
|
5/32' | 3/8' | 1-3/4'' | 1/4' | 2 | HWM | RH | |
|
811.047.11
|
3/16' | 1/2' | 2'' | 1/4' | 2 | HWM | ||
|
811.050.11
|
5mm | 15/32' | 2'' | 1/4' | 2 | HWM | RH | |
|
811.060.11
|
Para juntas en contrachapado | 15/64' | 5/8' | 2'' | 1/4' | 2 | HWM | RH |
|
811.560.11
|
Para juntas en contrachapado | 15/64' | 3/4' | 2-1/2'' | 1/2' | 2 | HWM | RH |
|
811.564.11
|
Para máquinas Incra | 1/4' | 3/4' | 2-1/2'' | 1/2' | 2 | HWM | RH |
|
811.064.11
|
1/4' | 3/4' | 2'' | 1/4' | 2 | HWM | RH | |
|
811.065.11
|
Para Máquinas Incra | 1/4' | 3/4' | 2-1/4'' | 1/4' | 2 | HWM | RH |
|
811.070.11
|
7mm | 23/32' | 1-7/8'' | 1/4' | 2 | HWM | RH | |
|
811.080.11
|
5/16' | 3/4' | 2'' | 1/4' | 2 | HWM | RH | |
|
811.081.11
|
Para máquinas Leigh | 5/16' | 1' | 2-3/4'' | 1/4' | 2 | HWM | RH |
|
811.581.11
|
Para máquinas Incra | 5/16' | 1' | 2-3/4'' | 1/2' | 2 | HWM | RH |
|
811.595.11
|
Para máquinas Incra | 3/8' | 1' | 2-5/8'' | 1/2' | 2 | HW | RH |
|
811.095.11
|
3/8' | 3/4' | 2'' | 1/4' | 2 | HW | RH | |
|
811.096.11
|
Para máquinas Incra | 3/8' | 1' | 2-1/2'' | 1/4' | 2 | HW | RH |
|
811.096.11-X10
|
3/8' | 1' | 2-1/2'' | 1/4' | 2 | HW | RH | |
|
811.100.11
|
10mm | 3/4' | 1-7/8'' | 1/4' | 2 | HW | RH | |
|
811.600.11
|
10mm | 1' | 2-1/2'' | 1/2' | 2 | HW | RH | |
|
811.620.11
|
12mm | 1' | 2-1/2'' | 1/2' | 2 | HW | RH | |
|
811.120.11
|
12mm | 3/4' | 2'' | 1/4' | 2 | HW | RH | |
|
811.123.11
|
Para juntas en contrachapado | 31/64' | 1' | 2-1/4'' | 1/4' | 2 | HW | RH |
|
811.623.11
|
Para juntas en contrachapado | 31/64' | 1' | 2-1/2'' | 1/2' | 2 | HW | RH |
|
811.627.11
|
1/2' | 1' | 2-5/8'' | 1/2' | 2 | HW | RH | |
|
811.628.11
|
Para máquinas Leigh | 1/2' | 1-1/4' | 3'' | 1/2' | 2 | HW | RH |
|
811.127.11
|
1/2' | 3/4' | 2-1/4'' | 1/4' | 2 | HW | RH | |
|
811.140.11
|
14mm | 3/4' | 2'' | 1/4' | 2 | HW | RH | |
|
811.142.11
|
9/16' | 9/16' | 2-1/4'' | 1/4' | 2 | HW | RH | |
|
811.150.11
|
15mm | 3/4' | 2-1/4'' | 1/4' | 2 | HW | RH | |
|
811.158.11
|
5/8' | 3/4' | 2-5/8'' | 1/4' | 2 | HW | RH | |
|
811.660.11
|
5/8' | 1' | 2-1/2'' | 1/2' | 2 | HW | RH | |
|
811.661.11
|
16mm | 1' | 2-1/2'' | 1/2' | 2 | HW | RH | |
|
811.160.11
|
16mm | 3/4' | 2-1/4'' | 1/4' | 2 | HW | RH | |
|
811.180.11
|
18mm | 3/4' | 2'' | 1/4' | 2 | HW | RH | |
|
811.182.11
|
Para juntas en contrachapado | 23/32' | 1' | 2-1/4'' | 1/4' | 2 | HW | RH |
|
811.682.11
|
Para juntas en contrachapado | 23/32' | 1' | 2-1/2'' | 1/2' | 2 | HW | RH |
|
811.690.11
|
3/4' | 1' | 2-1/2'' | 1/2' | 2 | HW | RH | |
|
811.191.11
|
3/4' | 3/4' | 2-1/4'' | 1/4' | 2 | HW | RH | |
|
811.200.11
|
20mm | 3/4' | 2'' | 1/4' | 2 | HW | RH | |
|
811.700.11
|
20mm | 1' | 2-5/16'' | 1/2' | 2 | HW | RH | |
|
811.220.11
|
22mm | 3/4' | 2-1/4'' | 1/4' | 2 | HW | RH | |
|
811.254.11
|
1' | 3/4' | 2'' | 1/4' | 2 | HW | RH | |
|
811.754.11
|
1' | 1-1/4' | 3'' | 1/2' | 2 | HW | RH | |
|
811.785.11
|
1-1/8' | 1-1/4' | 3'' | 1/2' | 2 | HW | RH |