Ultra Fine Finishing Saw Blades for cutting frames
285.5
Range of cutting-edge saw blades with very low noise
The new CMT EXTREME BALANCING™ system allows for extremely accurate dynamic balancing of the saw blade, several orders of magnitude above and beyond that which is currently available in the marketplace.
The circular saw blades of the new 285 Orange Chrome series are free from any micro-imbalance detected during the production phase, making them extremely silent and balanced.
The circular saw blades of the new 285 Orange Chrome series are free from any micro-imbalance detected during the production phase, making them extremely silent and balanced.
Details
CMT XTREME BALANCING™
Each blade undergoes rigorous assessment and only in the event that micro imbalance is detected will the appropriate correction holes be applied.
You may find 1 to 5 micro balancing holes on your blade, depending on the degree of micro imbalance (fig.1). When in perfect balance, a single incision will appear on
the blade as proof of balance.
These holes will have no effect on the technical properties of the blade during use (such as an increase in noise**, chip build-up at the correction site, etc.).
This translates to precise cutting, longer blade life, reduced vibration and noise, and less wear and tear on your machine components.
**Results are based on tests conducted by an independent laboratory.
Check out the results
You may find 1 to 5 micro balancing holes on your blade, depending on the degree of micro imbalance (fig.1). When in perfect balance, a single incision will appear on
the blade as proof of balance.
These holes will have no effect on the technical properties of the blade during use (such as an increase in noise**, chip build-up at the correction site, etc.).
This translates to precise cutting, longer blade life, reduced vibration and noise, and less wear and tear on your machine components.
**Results are based on tests conducted by an independent laboratory.
Check out the results
Variations
Filter
| Item Code | D | B | FT | Z | K | P | α | β |
|---|---|---|---|---|---|---|---|---|
|
285.580.10M
|
250 | 30 | COMBI3 | 80 | 3 | 2,5 | 10 | ATB 20° |
|
285.596.12M
|
300 | 30 | COMBI3 | 96 | 3 | 2,5 | 10 | ATB 20° |