Solid Surface Rounding Over Bowl Bits
8/980.541-8/966.6
These bits are the best tool for rounding over and trimming countertop edges after the bowl is mounted.
Can be used together with the CMT 8/980.551.11 bevel cutter for a flush cut-out between the countertop and the installed undermount bowl.
Can be used together with the CMT 8/980.551.11 bevel cutter for a flush cut-out between the countertop and the installed undermount bowl.
For use on hand-held routers.
Features a non-marring Delrin® bearing to protect the finished edges as well as surfaces.
Details
Ideal for use with all composite materials:
Variations
Filter
| Item Code | A | D | T | I | R | L | S |
|
|
|
|---|---|---|---|---|---|---|---|---|---|---|
|
866.601.11
|
15° | 50,8 | 19 | 25,4 | 12,7 | 74,9 | 12,7 | 990.058.00 | 991.057.00 | 791.041.00 |
|
866.602.11
|
15° | 50,8 | 25,4 | 31,75 | 12,7 | 81,3 | 12,7 | 990.058.00 | 991.057.00 | 791.041.00 |
|
966.601.11
|
15° | 50,8 | 19 | 25,4 | 12,7 | 74,9 | 12 | 990.058.00 | 991.057.00 | 791.041.00 |
|
966.602.11
|
15° | 50,8 | 25,4 | 31,75 | 12,7 | 81,3 | 12 | 990.058.00 | 991.057.00 | 791.041.00 |
|
980.541.11
|
18° | 54 | 19 | 25,4 | 12,7 | 78,1 | 12 | 990.058.00 | 991.057.00 | 791.041.00 |
|
880.541.11
|
18° | 54 | 19 | 25,4 | 12,7 | 78,1 | 12,7 | 990.058.00 | 991.057.00 | 791.041.00 |