Solid Surface Rounding Over Bowl Bit (ogee profile)
8/980.542
These bits roundover and trim the countertop edges after the bowl is mounted.
Can be used with the CMT 8/980.551.11 and 8/966.501.11 bevel cutter for a flush cut-out between the countertop and installed undermount bowl.
For use on hand-held portable routers.
Features a non-marring Delrin® bearing to protect the finished edges.
Can be used with the CMT 8/980.551.11 and 8/966.501.11 bevel cutter for a flush cut-out between the countertop and installed undermount bowl.
For use on hand-held portable routers.
Features a non-marring Delrin® bearing to protect the finished edges.
Details
Ideal for use with all composite materials:
Variations
Filter
| Item Code | A | D | T | I | R | L | S | R1 |
|
|
|
|---|---|---|---|---|---|---|---|---|---|---|---|
|
880.542.11
|
15 | 54 | 19 | 25.4 | 12.7 | 77.6 | 12.7 | 6.35 | 990.058.00 | 991.057.00 | 791.041.00 |
|
980.542.11
|
15 | 54 | 19 | 25.4 | 12.7 | 77.6 | 12 | 6.35 | 990.058.00 | 991.057.00 | 791.041.00 |