Raised panel router bits with back cutter
8/990.5
These bits has a back-cutter which allows milling of both the front and back of the panel in the same cut. An additional 31,7mm (1-1/4") diameter bearing promotes safety by allowing you to take two shallow passes by using the Ø89mm (3-1/2") bit only.
Variations
Filter
| Item Code | D | T | L | Profile no. | S |
|
|
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
890.534.11
|
63.5 | 11.1 ~ 17.5 | 70 | A1 | 12.7 | 791.025.00 | 541.518.00 | 541.515.00 | 541.516.00 | 990.407.00 | 822.010.11 | 990.020.00 | ||
|
890.537.11
|
63.5 | 11.1 ~ 17.5 | 70 | B1 | 12.7 | 791.025.00 | 541.518.00 | 541.515.00 | 541.516.00 | 990.407.00 | 822.010.11 | 990.020.00 | ||
|
990.534.11
|
63.5 | 11.1 ~ 17.5 | 70 | A1 | 12 | 791.025.00 | 541.518.00 | 541.515.00 | 541.516.00 | 990.407.00 | 822.010.11 | 990.020.00 | ||
|
990.537.11
|
63.5 | 11,1 ~ 17,5 | 70 | B1 | 12 | 791.025.00 | 541.518.00 | 541.515.00 | 541.516.00 | 990.407.00 | 822.010.11 | 990.020.00 | ||
|
890.524.11
|
89 | 19 ~ 20.6 | 78.1 | A | 12.7 | 791.025.00 | 541.518.00 | 822.007.11 | 541.515.00 | 541.516.00 | 990.407.00 | 791.033.00 | 990.020.00 | |
|
890.527.11
|
89 | 19 ~ 25.4 | 78.1 | B | 12.7 | 791.025.00 | 541.518.00 | 822.007.11 | 541.515.00 | 541.516.00 | 990.407.00 | 791.033.00 | 990.020.00 | |
|
990.524.11
|
89 | 19 ~ 20.6 | 78.1 | A | 12 | 791.025.00 | 541.518.00 | 822.007.11 | 541.515.00 | 541.516.00 | 990.407.00 | 791.033.00 | 990.020.00 | |
|
990.527.11
|
89 | 19 ~ 25.4 | 78.1 | B | 12 | 791.025.00 | 541.518.00 | 822.007.11 | 541.515.00 | 541.516.00 | 990.407.00 | 791.033.00 | 990.020.00 |