Edge banding router bit sets
8/955.510
This is a great set to create cost-effective, yet attractive durable edges to your cabinet doors.
For use with 12,7mm or 25,4mm thick panels in plywood or MDF.
Easy to use: center each cutter on the stock and make the cut; glue the two pieces together; flush trim after assembly, if necessary.
The set features a 60° angle tongue & groove with an ample surface area for glue application.
For use with 12,7mm or 25,4mm thick panels in plywood or MDF.
Easy to use: center each cutter on the stock and make the cut; glue the two pieces together; flush trim after assembly, if necessary.
The set features a 60° angle tongue & groove with an ample surface area for glue application.
Variations
Filter
| Item Code | D | I | A | L | S | Z | MAT | RH-LH |
|
|
|
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
855.510.11
|
40 | 25,4 | 30° | 74,5 | 12,7 | 2 | HW | RH | 990.423.00 | 990.058.00 | 991.057.00 | 791.018.00 |
|
955.510.11
|
40 | 25,4 | 30° | 74,5 | 12 | 2 | HW | RH | 990.423.00 | 990.058.00 | 991.057.00 | 791.018.00 |