Combination trimmer router bits
7/8/909-7/910
CMT’s combination flush and bevel trim bits are perfect for executing a variety of superb precision finishing on laminates with ease without even changing the bit.
Simply lower the bit cutting depth for precise right angle cuts or raise to 25° to create rounded edges. Suitable for both soft and hardwood.
They feature two flutes for executing smoother cuts and for rounding off table legs and other soft areas on furniture susceptible to damage.
They feature two flutes for executing smoother cuts and for rounding off table legs and other soft areas on furniture susceptible to damage.
Shop tips:
after resharpening, replace bearing
791.002.11 (Ø9,5mm)
after resharpening, replace bearing
791.002.11 (Ø9,5mm)
with undersized bearing 791.062.00 (Ø9,3mm)
Variations
Filter
| Item Code | A | D | I | L | S | Z | MAT | RH-LH |
|
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
809.022.11
|
22 | 12.7 | 7.8 | 47.6 | 6.35 | 2 | HW | RH | 991.060.00 | 791.035.00 | ||||||
|
809.023.11
|
22 | 17.46 | 9.5 | 51 | 6.35 | 3 | HW | RH | 990.422.00 | 990.058.00 | 991.057.00 | 791.002.00 | ||||
|
809.025.11
|
25 | 19.05 | 10 | 52 | 6.35 | 2 | HW | RH | 990.422.00 | 990.058.00 | 991.057.00 | 791.002.00 | ||||
|
909.260.11
|
30 | 27 | 9 | 55 | 8 | 2 | HW | RH | 990.423.00 | 990.058.00 | 991.057.00 | 791.018.00 | ||||
|
910.260.11
|
45 | 27 | 5.5 | 51.5 | 8 | 2 | HW | RH | 990.423.00 | 990.058.00 | 991.057.00 | 791.018.00 | ||||
|
709.260.11
|
30 | 27 | 9 | 55 | 6 | 2 | HW | RH | 990.423.00 | 990.058.00 | 991.057.00 | 791.018.00 | ||||
|
710.260.11
|
45 | 27 | 5.5 | 51.5 | 6 | 2 | HW | RH | 990.423.00 | 990.058.00 | 991.057.00 | 791.018.00 |