Classical Ogee Bits
7/8/944
CMT’s classical ogee bits feature an inverted ogee profile, with the concave edge adjacent to the upper surface of the workpiece.
A vertical bead was added to separate the curves and creates an attractrive detail.
Shop tips:
this type of machining can be very challenging, for best results, multiple passes are recommended.
Variations
Filter
| Item Code | R | D | I | S | Z | MAT | RH-LH |
|
|
|
|
|---|---|---|---|---|---|---|---|---|---|---|---|
|
844.287.11
|
4 | 28,5 | 13 | 6,35 | 2 | HW | RH | 990.423.00 | 791.003.00 | 990.058.00 | 991.057.00 |
|
844.787.11
|
4 | 28,5 | 13 | 12,7 | 2 | HW | RH | 990.423.00 | 791.003.00 | 990.058.00 | 991.057.00 |
|
944.287.11
|
4 | 28,7 | 13 | 8 | 2 | HW | RH | 990.423.00 | 791.003.00 | 990.058.00 | 991.057.00 |
|
744.287.11
|
4 | 28,7 | 13 | 6 | 2 | HW | RH | 990.423.00 | 791.003.00 | 990.058.00 | 991.057.00 |
|
944.787.11
|
4 | 28,7 | 13 | 12 | 2 | HW | RH | 990.423.00 | 791.003.00 | 990.058.00 | 991.057.00 |
|
844.350.11
|
6,4 | 34,9 | 18,5 | 6,35 | 2 | HW | RH | 990.423.00 | 791.003.00 | 990.058.00 | 991.057.00 |
|
844.850.11
|
6,4 | 34,9 | 18,5 | 12,7 | 2 | HW | RH | 990.423.00 | 791.003.00 | 990.058.00 | 991.057.00 |
|
944.350.11
|
6,4 | 35 | 18,5 | 8 | 2 | HW | RH | 990.423.00 | 791.003.00 | 990.058.00 | 991.057.00 |
|
744.350.11
|
6,4 | 35 | 18,5 | 6 | 2 | HW | RH | 990.423.00 | 791.003.00 | 990.058.00 | 991.057.00 |
|
944.850.11
|
6,4 | 35 | 18,5 | 12 | 2 | HW | RH | 990.423.00 | 791.003.00 | 990.058.00 | 991.057.00 |