Panel Pilot Bits with Guide
7/8/953
An absolutely indispensable bit for making cabinets. CMT Flush and V-Groove bits allow you to make cabinet front frames in 25mm stock that fit perfectly with the sides. The added V-cutter feature makes a decorative groove along the hinge joint to hide the seam.
Shop Tips: For best results, leave less than 3mm overhang on cabinet front frames for easier routing.
Variations
Filter
| Item Code | d | D | I | L | S | Z | MAT | RH-LH |
|
|
|
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
753.001.11
|
12.7 | 19 | 25.4 | 67 | 6 | 2 | HW | RH | 990.423.00 | 791.003.00 | 990.058.00 | 991.057.00 |
|
853.001.11
|
12.7 | 19 | 25.4 | 67 | 6.35 | 2 | HW | RH | 990.423.00 | 791.003.00 | 990.058.00 | 991.057.00 |
|
853.501.11
|
12.7 | 19 | 25.4 | 77 | 12.7 | 2 | HW | RH | 990.423.00 | 791.003.00 | 990.058.00 | 991.057.00 |
|
953.001.11
|
12.7 | 19 | 25.4 | 67 | 8 | 2 | HW | RH | 990.423.00 | 791.003.00 | 990.058.00 | 991.057.00 |
|
953.501.11
|
12.7 | 19 | 25.4 | 77 | 12 | 2 | HW | RH | 990.423.00 | 791.003.00 | 990.058.00 | 991.057.00 |