Rabbeting Cutter Head with Shear Angle
694.100
These cutter heads have been designed for:
- rabbeting from either top or bottom;
- jointing
- grooving
For use on spindle moulder machines, double-end tenoner and edging machines.
Suitable for all materials, but best on chipboard, MDF, wood composites, plastic materials and laminates.
Improved design with shear angle.
Technical details
- Hard aluminium alloy body with high resistance to tensile and yield stress.
- 2 universal HWM straight knives 50x12x1,5mm [Z2], 1 up cut - 1 down cut.
- 4 universal HWM scoring knives 14x14x2mm [V4].
- Tools for manual feed (MAN).
- Pins for automatic positioning of the knives.
Supplied in a solid plastic box.
Details
790.140.00 and 790.500.00
are supplied in 10-piece pack or multiple.
Safety Tips:
The TW-006 Torque Screwdriver is recommended
for the proper fastening of screws.
for the proper fastening of screws.
Variations
Filter
| Item Code | D | B | I | Z | Spurs | MAX RPM | MAT |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
694.100.19
|
100 | 19,05 | 51 | 2 | 4 | 7500~12500 | HW | 790.140.00 | 990.093.00 | 991.073.00 | 790.500.00 | 695.999.46 | 990.064.00 | 991.064.00 |
|
694.100.30
|
100 | 30 | 51 | 2 | 4 | 7500~12500 | HW | 790.140.00 | 990.093.00 | 991.073.00 | 790.500.00 | 695.999.46 | 990.064.00 | 991.064.00 |
|
694.100.31
|
100 | 31,75 | 51 | 2 | 4 | 7500~12500 | HW | 790.140.00 | 990.093.00 | 991.073.00 | 790.500.00 | 695.999.46 | 990.064.00 | 991.064.00 |
|
694.100.35
|
100 | 35 | 51 | 2 | 4 | 7500~12500 | HW | 790.140.00 | 990.093.00 | 991.073.00 | 790.500.00 | 695.999.46 | 990.064.00 | 991.064.00 |
|
694.125.40
|
125 | 40 | 51 | 2 | 4 | 6100 ~ 10000 | HW | 790.140.00 | 990.093.00 | 991.073.00 | 790.500.00 | 695.999.46 | 990.064.00 | 991.064.00 |
|
694.125.50
|
125 | 50 | 51 | 2 | 4 | 6100 ~ 10000 | HW | 790.140.00 | 990.093.00 | 991.073.00 | 790.500.00 | 695.999.46 | 990.064.00 | 991.064.00 |